MiOS Support Center

User Guides

(G1) Connect Your G100

Last Updated: Oct 10, 2012 02:57PM PDT

Even though it doesn't use Wi-Fi signals, your G100 easily connects to your existing Wi-Fi router.  If you don't already have a Wi-Fi router don't worry, you can also connect your G100 directly to your broadband modem (or a wired gateway or switch) with the supplied Ethernet cable. 

If you already have a working Wi-Fi router, use this connection to simply add the G100's control capabilities to your existing Wi-Fi system.  Use the supplied Ethernet cable to connect your G100 to one of your existing Wi-Fi router's open connection ports.  Connect the G100's power adapter into its 12V power receptacle, and then into an AC electrical outlet.


Wait for the, lighted LED indicators for Power, Ready and Network to be lit and not blinking. Please allow up to 2 minutes for this initial boot up. When the lights are solid, your g100 is now properly connected to your Wi-Fi router and ready for next configuration steps.

Once you've successfully connected your G100 to your home network, you're ready to set up an account that gives you secure access to your system. 

Note: If the indicators won't light up solid or you see the red Error light come on, consult the troubleshooting section.

NEXT: Create Your Account


Contact Us

  • Email Us
  • USA Toll Free:  +1 (888) 510-6467
    International:  +1 (213) 245-7400
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found