If you've connected your Vera 3 as shown in the initial connection instructions and created (and logged into) your account, your computer should be able to find your Vera automatically.
This is true whether you're using your Vera 3 as your main Wi-Fi router or connected via an Ethernet cable to an existing Wi-Fi setup.
If that's not happening and you're unable to see your Vera 3 even though you've connected it properly, check that the WAN light on the front panel is lit up solidly (this may take up to a minute after initial connection).
If it's not lit up, you may have a problem with your network that needs to be addressed. Before you start any troubleshooting first check to see that the actual cable and Internet connection aren't the culprit. If you have another Ethernet cable, try connecting that between the WAN port on the back of your Vera 3 and your broadband connection. Wait up to a minute for the WAN light on the Vera 3 to light up solidly. If it does, problem solved.
You might also try connecting your computer to the broadband connection using the same cable that you were using for the Vera 3. If you're unable to get Internet connectivity, you may have a problem with your broadband modem.
Note: Keep in mind that almost all Internet Service Providers (ISPs) briefly lose connectivity now and again. You may be having a temporary problem with yours...see if you're getting Internet service at all without Vera 3 connected to confirm.
If after checking the connections and confirming that everything else is working properly you still aren't able to set up your Vera 3, please contact us using the form available at the Contact page of www.micasaverde.com.
If you're comfortable with computer networks and advanced setings, you can troubleshoot your network connection yourself. Let's look at a few first steps to narrow down the problem.
NEXT: Network Troubleshooting