First, find the electrical outlet where the plug-in lighting module will ultimately be placed. Any standard US 3-prong wall outlet will work. Plug the lighting module into the wall, and then plug in whatever light or appliance you want to control into the module's outlet marked with the Z-Wave logo.
The pairing process must take place just a short distance -- less than six feet -- between the plug-in module and your Vera Smart Controller. If you've located the plug-in module close to where your Smart Controller is plugged in to electrical power, you can leave everything where it is to begin the pairing process. But if you've decided to install the plug-in module in another room, or further away than six feet, you'll put your Vera Smart Controller into "battery mode" (so that it stays powered) and bring it to the plug-in module for pairing.
If you have a VeraLite Smart Controller, click here for instructions on how to enter battery mode.
If you have a Vera3 Smart Controller, click here for instructions on how to enter battery mode.
To Pair With The VeraLite Smart Controller
On the VeraLite,
To save your changes and exit the battery mode, you will need to press and hold the "+" button for about 5 seconds. Now re-connect your VeraLite Smart Controller to the rest of your system (AC power and network connection).
To Pair With The Vera3 Smart Controller
Now press the pairing button on the Evolve lighting controller:
The green Z-Wave light on the Vera3 will flash quickly to show that the plug-in module was recognized. Hold in the "Z-Wave" button for 3 seconds to save the pairing. Now re-connect your Vera3 Smart Controller to the rest of your system (AC power and network connection).
The plug-in module has now been paired to your Vera system and is ready to be controlled or automated through your Vera Dashboard.